Mingdao Brand Single Girder Electric Overhead Traveling Cranes
Brief Introducion:
LD model single girder overhead crane is characterized by more reasonable structure and higher strength steel as a whole crane.
Single girder overhead crane is more typical when lifting capacity less than 20T.
Used together with CD1 model MD1 model electric hoist as a complete set, it is a light duty crane with a capacity 0.5 ton ~ 32ton.
The span is 7.5m~ 22.5m. Working duty is A3~A5, working temperature is -25-40ºC.
This product is widely used in steel mills, warehouse,hydropower station,production workshop, production line, materials stocks,
equipment assembly etc to lift goods.
We have comprehensive standard equipment and professional design engineers to offer best solutions for individual requirements.
This product has two operational methods, ground(pendent controller /remote controller) or operational cabin room .
| Lifting Mechanism |
Wire Rope Hoist
(CD/MD/European Type)
Lift Speed: single/dual
Travel speed:variable
Function: Lift goods |
|
Main Girder/Beam
|
Rigid welded box type
Module design
Gear motor
Travel speed:variable
Function:Bearing load
Material: Q235/345 |
|
| End Carriages |
Rigid welded box type
Modular design
Function: Push crane run forward or reverse
Materials:Q235/345 |
|
| Control |
Ground pendent button
Radio Remote control
Cabin control |
|
| Electric parts |
Circuit breaker/ AC contactor etc electric parts use
Schneider /Siemens/ABB/DELIXI
Etc famous brand |
|
| Main Parameters List |
| Crane Traveling Mechanism |
Traveling Speed(m/min) |
20 |
30 |
45 |
60 |
| Ratio |
58.95 |
39.42 |
26.51 |
19.44 |
| Motor |
Type |
Cone Squirrel-cage |
Cone Squirrel-cage |
| Power(kw) |
0.8*2, 1.5*2, 2.2*2 |
1.5*2, 2.1*2 |
| Rotary Speed(r/min) |
1380 |
1350 |
| Hoist Lifting Mechanism and Traveling Mechanism |
Electric Hoist Model |
MD1 |
CD1 |
| Lifting Speed(m/min) |
8/0.8, 7/0.7, 3.5/0.35 |
8, 7, 3.5 |
| Span(m) |
7.5-22.5 or assigned |
| Lifting Capacity(t) |
0.5-32 |
| Lifting Height(m) |
6, 9, 12, 18, 24, 30 |
| Traveling Speed(m/min) |
20, 30 |
| Motor |
Cone Squirrel-cage |
| Work Duty |
Intermediate Jc=25% |
| Power Supply |
380V 50HZ 3P |
| Wheel Diameter |
Φ270, Φ400 |
| Trail Width |
37-70 |
Safety Devices for overhead bridge crane:
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we
provide are not only the electric protective devices or alarm bell but also other
equipments as following:
1.Overload Limit Switch
2. Rubber Buffers
3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8.Lifting Height Limit Device
Advantages of a single girder design:
1)Less expensive due to a simpler trolley design, reduced freight costs, simplified and faster installation, and less material for the
bridge and runway beams.
2)Most economical option for light to medium-duty cranes
3)Lower loads on the building structure or foundations due to a reduced deadweight. In many cases, it can be supported by existing
roof structure without the use of additional support columns.
4)Better hook approach for both trolley travel and bridge travel
5)Easier to install, service, and maintain
6)Ideal for workshops, warehouses, material yards, and manufacturing and production facilities
7)Lighter load on runway rails or beams means less wear on the beams and end truck wheels over time
8)Great for facilities with low headroom
FAQ ABOUT MINGD CRANES:
1.Can the cranes be customized?
Yes,every customer's working condition is different, all of our products can be customized depend on customers' requirements.
Please give us the information as clear as you can, so we can give our best design to suit for your demands.
2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind
of operation way you need.
3.I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
4.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
5.In order to offer the most suitable design solution for you, it will be great helpful if you can offer us the following information to us:
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the rails? How long is it?
5. Power supply: Voltage.
6. Working condition: what kind of material to lift? temperature?
7. It would be much better if it is possible for you to offer the drawing photo of your workshop.
Company Introduction:
We are a member of China Lifting Industry Association, safety-recognized enterprise, national crane machinery designated production organizations, we have obtained mechanical engineering "design certificate", and the national issued crane "manufacturing permit",installation and maintenance, renovation and maintenance of the "License" and so on.
In the past 10 years, we are aiming at China domestic market and become a leading manufacturer in China. Also, with the help of China trading companies we have exported our products to many countries such as Vietnam, Philippines, Sri Lanka, Bangladesh, France, Dubai, Kazakhstan, Russia, Tanzania ,Peru , Newzealand,etc countries . We got 99% good feedback from the overseas customers.
Now we are not only aiming at China domestic market growth ,but also to expand the international market with our quality and price advantages. Send us an inquiry now.
The company has six functional departments, including R&D department, sales department, materials supply department, production department, QC department,after-sales department. There are 16 workshops including electrical, riveting, forging, assembly, heat treatment, machining and maintenance.
Our company produces various lifting equipment and loading and unloading. The equipment is 30,000 tons and the sales income is 360 million yuan. 18 offices and 76 sales and service agencies in power plants, industrial and mining enterprises, and port terminals.
Integrity, quality, customer satisfaction is the pursuit of Mingdao heavy workers!
Certificates:
Customized Design &Production Accepted According to Your Using
Situation, Please Contact Us for Further Communication:
Tel:+8613953895525
Website: mdcrane.en.made-in-china.com
){kind=link}