Euro-Style Europe Double/Single Girder Electric Hoist Overhead Bridge Crane
Brief Introducion:
This under running single girder bridge crane is one kind of light duty crane, it runs under H steel rail .It is designed and made by reasonable structure and higher strength steel .
It is prohibited to use this equipment in the combustible,explosive and corrosive environment.
It uses together with CD1 model MD1 model electric hoist as a complete set, it is a light duty crane with a capacity 0.5 ton ~ 32ton. The span is 7.5m~ 22.5m. Working duty is A3~A5, working temperature is -25-40ºC.
This product is widely used in plants, warehouse,steel plant,steel yard, material stocks etc to lift goods. It is prohibited to use the equipment in the combustible, explosive or corrosive environment(Need explosion proof type for this).
This product has two operational methods, ground(pendent controller /remote controller) or operational cabin room .
We accept customized production according to your special requirements.
Product Details Photo
| Main Parameters List |
| Crane Traveling Mechanism |
Traveling Speed(m/min) |
20 |
30 |
45 |
60 |
| Ratio |
58.95 |
39.42 |
26.51 |
19.44 |
| Motor |
Type |
Cone Squirrel-cage |
Cone Squirrel-cage |
| Power(kw) |
0.8*2, 1.5*2, 2.2*2 |
1.5*2, 2.1*2 |
| Rotary Speed(r/min) |
1380 |
1350 |
| Hoist Lifting Mechanism and Traveling Mechanism |
Electric Hoist Model |
MD1 |
CD1 |
| Lifting Speed(m/min) |
8/0.8, 7/0.7, 3.5/0.35 |
8, 7, 3.5 |
| Span(m) |
7.5-22.5 or assigned |
| Lifting Capacity(t) |
0.5-20 |
| Lifting Height(m) |
6, 9, 12, 18, 24, 30 |
| Traveling Speed(m/min) |
20, 30 |
| Motor |
Cone Squirrel-cage |
| Work Duty |
Intermediate Jc=25% |
| Power Supply |
380V 50HZ 3P |
| Wheel Diameter |
Φ270, Φ400 |
| Trail Width |
37-70 |
Safety Devices for overhead bridge crane:
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we
provide are not only the electric protective devices or alarm bell but also other
equipments as following:
1.Overload Limit Switch
2. Rubber Buffers
3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8.Lifting Height Limit Device
Advantages of a single girder design:
1)Less expensive due to a simpler trolley design, reduced freight costs, simplified and faster installation, and less material for the
bridge and runway beams.
2)Most economical option for light to medium-duty cranes
3)Lower loads on the building structure or foundations due to a reduced deadweight. In many cases, it can be supported by existing
roof structure without the use of additional support columns.
4)Better hook approach for both trolley travel and bridge travel
5)Easier to install, service, and maintain
6)Ideal for workshops, warehouses, material yards, and manufacturing and production facilities
7)Lighter load on runway rails or beams means less wear on the beams and end truck wheels over time
8)Great for facilities with low headroom
ABOUT MINGD CRANES:
FAQ:
1.Can the cranes be customized?
Yes,every customer's working condition is different, all of our products can be customized depend on customers' requirements.
Please give us the information as clear as you can, so we can give our best design to suit for your demands.
2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind
of operation way you need.
3.I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
4.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
5.In order to offer the most suitable design solution for you, it will be great helpful if you can offer us the following information to us:
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the rails? How long is it?
5. Power supply: Voltage.
6. Working condition: what kind of material to lift? temperature?
7. It would be much better if it is possible for you to offer the drawing photo of your workshop.
Certificates:
Audited Supplier 
){kind=link}
){kind=link}