Under Running Type Underslung Type Europe Standard Overhead Crane

• Customization: Available
• Certification: GS, CE, ISO9001
• Condition: New
• Model NO.: LXE
• Operation Form: Remote Control
• Maximum Lifting Height: 6m, 9m, 12m, 18m, 24m, 30m
• Maximum Lifting Weight: 0.5ton-32ton
• Main Girder Form: Single Girder
• Type: Ordinary
• Product Name: Single Girder Overhead Crane
• Span: 5-40m
• Color: on Request
• Warranty: 2 Years
• Overseas Installation: Available
• Power Supply: 380V 3pH 50Hz
• Work Duty: A3-A5
• Application: Warehouse Workshop Hoist
• Control Method: Pedent Button or Remote Control or Cabin
• Priduction Time: 10-15 Days
• Transport Package: Container or Bulk Ship
• Specification: Customized type
• Trademark: MD
• Origin: China
• HS Code: 8426112000
• Production Capacity: 1000sets/ Year

Product Description

Under Running Type Underslung Type Europe Standard Overhead Crane

EUROPEAN STANDARD UNDER RUNNING OVERHEAD CRANE

REGULAR TYPE UNDER RUNNING OVERHEAD CRANE



Brief Introducion:

This under running single girder bridge crane is one kind of light duty crane, it runs under H steel rail .It is designed and made by reasonable structure and higher strength steel .

It is prohibited to use this equipment in the combustible,explosive and corrosive environment.

It uses together with CD1 model MD1 model electric hoist as a complete set, it is a light duty crane with a capacity 0.5 ton ~ 32ton. The span is 7.5m~ 22.5m. Working duty is A3~A5, working temperature is -25-40ºC.

This product is widely used in plants, warehouse,steel plant,steel yard, material stocks etc to lift goods. It is prohibited to use the equipment in the combustible, explosive or corrosive environment(Need explosion proof type for this).

This product has two operational methods, ground(pendent controller /remote controller) or operational cabin room .

We accept customized production according to your special requirements.

Lifting Mechanism	Wire Rope Hoist (CD/MD/European Type) Lift Speed: single/dual Travel speed:variable Function: Lift goods
Main Girder/Beam	Rigid welded box type Module design Gear motor Travel speed:variable Function:Bearing load Material: Q235/345
End Carriages	Rigid welded box type Modular design Function: Push crane run forward or reverse Materials:Q235/345
Control	Ground pendent button Radio Remote control Cabin control
Electric parts	Circuit breaker/ AC contactor etc electric parts use Schneider /Siemens/ABB/DELIXI Etc famous brand

 
 

Main Parameters List
Crane Traveling Mechanism	Traveling Speed(m/min)		20	30	45	60
	Ratio		58.95	39.42	26.51	19.44
	Motor	Type	Cone Squirrel-cage		Cone Squirrel-cage
		Power(kw)	0.8*2, 1.5*2, 2.2*2		1.5*2, 2.1*2
		Rotary Speed(r/min)	1380		1350
Hoist Lifting Mechanism and Traveling Mechanism	Electric Hoist Model		MD1		CD1
	Lifting Speed(m/min)		8/0.8, 7/0.7, 3.5/0.35		8, 7, 3.5
	Span(m)		7.5-22.5 or assigned
	Lifting Capacity(t)		0.5-32
	Lifting Height(m)		6, 9, 12, 18, 24, 30
	Traveling Speed(m/min)		20, 30
	Motor		Cone Squirrel-cage
Work Duty			Intermediate Jc=25%
Power Supply			380V 50HZ 3P
Wheel Diameter			Φ270, Φ400
Trail Width			37-70

Safety Devices for overhead bridge crane:
 
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we
provide are not only the electric protective devices or alarm bell but also other
equipments as following:
1.Overload Limit Switch
2. Rubber Buffers
3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8.Lifting Height Limit Device

Advantages of a single girder design:
1)Less expensive due to a simpler trolley design, reduced freight costs, simplified and faster installation, and less material for the
bridge and runway beams.

2)Most economical option for light to medium-duty cranes

3)Lower loads on the building structure or foundations due to a reduced deadweight. In many cases, it can be supported by existing
roof structure without the use of additional support columns.

4)Better hook approach for both trolley travel and bridge travel

5)Easier to install, service, and maintain

6)Ideal for workshops, warehouses, material yards, and manufacturing and production facilities

7)Lighter load on runway rails or beams means less wear on the beams and end truck wheels over time

8)Great for facilities with low headroom


FAQ ABOUT MINGD CRANES:
 
1.Can the cranes be customized?
Yes,every customer's working condition is different, all of our products can be customized depend on customers' requirements.
Please give us the information as clear as you can, so we can give our best design to suit for your demands.
 
2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind
of operation way you need.
 
3.I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
 
4.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
 
5.In order to offer the most suitable design solution for you, it will be great helpful if you can offer us the following information to us:
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the rails? How long is it?
5. Power supply: Voltage.
6. Working condition: what kind of material to lift? temperature?
7. It would be much better if it is possible for you to offer the drawing photo of your workshop.

Certificates:
 

Customized Design &Production Accepted According to Your Using
Situation, Please Contact Us for Further Communication:
 
Tel:[phone]
Website: mdcrane.en.made-in-china.com