Summary:
Rubber-tyred Container Gantry Cranes are applicable to remove, load and unload international standard containers. Form of drawing trolley is adopted to achieve light structure, advanced performance, high production efficiency, fine maneuverability and small sensibility to unflatness of the ground. The crane is powered by cable drum. At the same time, diesel generating set is equipped for conditions when the power is off or the crane moves to another yard. As a result, maximum economic benefits are brought to the users.
Environmental Conditions:
1, The power source is three-phase alternating current, rated frequency is 50HZ, rated voltage is 380V.
2. The temperature in the working environment should be in the scope of-20°C ~ +45°C and the relative humidity is no higher than 95% (with dew).
3, During work, the wind speed should be no higher than 20m/s;and during non-work, the wind speed should be no higher than 44m/s.
4, The group classification of the crane is A6.
5. The crane traveling lane is supposed not to slope more than 1% and no more than 3% for local slope. The ground slope on the two sides of the span should be in the same direction, that is to say, both upslope or downslope at the same time.
Notices for order:
When the users are placing an order or signing a contract, the basic parameters (rated lifting capacity, lifting height, span etc.) must be described clearly for us to supply products up to requirements under working conditions.
Product Parameters
| Produet Specification |
|
LJMJ-35 |
|
| Lifting capacit |
t |
35 |
|
| Span |
m |
20 |
|
| Wheel Gauge |
m |
6.8 |
|
| stack heigh |
Layer |
3,4,5 |
|
|
| Container Specification |
|
20',40' |
|
| Spreader Slweing angle |
. |
±5 |
|
|
| Lifting Height |
m |
13.5 |
| Working system |
|
A6,A7 |
|
| Speed |
Hoisting(full-load/no load) |
m/min |
12/18 |
|
| Trolley travelling |
24 |
|
| Crane travelling |
|
40 |
|
|
| Max.Wheel load |
KN |
≤200 |
| Installed Capacity |
KW |
110 |
| Power source |
|
3-phase A.C.50Hz 380V |
|
Ptroduct details
Safe Devices:
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we
provide are not only the electric protective devices or alarm bell but also other
equipments as following:
1.Overload Limit Switch
2. Rubber Buffers
3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8.Lifting Height Limit Device
Packing and shipping:
1.Electric parts and electric hoist packed by high quality plywood crate,
2.Other parts packed by Woven bag.
3.Shipped by Conatiners or Bulk Ship
Factory workshop:
Shandong Mingdao Heavy Industry Machinery Co., Ltd.Is located in Taian City,Shandong Province, China. We are mainly
engaged in the design, manufacture,installation and maintenance of single girder cranes(LD Models), Double Girder
Cranes (LH,QD etc),gantry cranes(MH,MDG..),Jib cranes(BZ,QZ,MZ etc), variable frequency cranes, Explosion-proof series
cranes(LB,QB etc), Cranes with grab bucket,Low headroom monorail Hoist, Electric Winches, scrapers and CD1 MD1 HC
Electric Hoist, Hand Chain Hoist etc...
In the past 10 years, we are aiming at China domestic market and become a leading manufacturer in China. Also,we have
exported our products to many countries such as Vietnam, Philippines, Sri Lanka, Bangladesh, France, Dubai, Kazakhstan,
Russia, Tanzania,Peru , New Zealand ,etc countries. We welcome you will cooperation with us in near future.
Certificates:
FAQ about Mingdao cranes:
1.Can the cranes be customized?
Yes,every customer's working condition is different, all of our products can be customized depend on customers' requirements.
Please give us the information as clear as you can, so we can give our best design to suit for your demands.
2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind
of operation way you need.
3.I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
4.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
For Inquiry:
In order to offer the most suitable design solution for you, it will be great helpful if you can offer the following information to us:
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the rails? How long is it?
5. Power supply: Voltage.
6. Working condition: what kind of material to lift? temperature?
7. It would be much better if it is possible for you to offer the drawing photo of your workshop.
){kind=link}