Mingdao Crane Brand Beam Lifting Equipment Single Beam Crane
Brief Introducion:
Our HD series single girder overhead crane has reasonable and optimized structure, maximum meet the needs in strength, stiffness and stability. To fully satisfying different customer requirements, the company takes full advantages of combining crane design with site condition, flexible box section designing structure and maintenace friendly feature, possibly make every step easy and individual. With computer optimization design box beam, low dead weight effectively reduces the cost in which workshop built with steel structure.
Product Advantage
Low dead weight of computerize optimized box section.
Aluminum alloy made drum shell, light weight with corrosion resist characteristic.
Lifting drive units apply to hardened parallel shaft gear box, complete seal lubricate design free maintenance. Energy effciency featured dual winding motor offer unique performances and dissipate heat
whatever in heavy working loads.
Geared motors of cross travel and long travel apply to closed type transmission gear, low noise, maintenance free.
Modularized electrics in multiple protection devices, always thinking of safety by improve operate experience.
Flashlight door plug in pendant push button, maintenance friendly.
Instantaneously respond limit switch automatically stop lifting movement when hook reach to both
upper and inferior limit.
| Lifting Mechanism |
Wire Rope Hoist
(CD/MD/European Type)
Lift Speed: single/dual
Travel speed:variable
Function: Lift goods |
|
Main Girder/Beam
|
Rigid welded box type
Module design
Gear motor
Travel speed:variable
Function:Bearing load
Material: Q235/345 |
|
| End Carriages |
Rigid welded box type
Modular design
Function: Push crane run forward or reverse
Materials:Q235/345 |
|
| Control |
Ground pendent button
Radio Remote control
Cabin control |
|
| Electric parts |
Circuit breaker/ AC contactor etc electric parts use
Schneider /Siemens/ABB/DELIXI
Etc famous brand |
|
| Main Parameters List |
| Crane Traveling Mechanism |
Traveling Speed(m/min) |
20 |
30 |
45 |
60 |
| Ratio |
58.95 |
39.42 |
26.51 |
19.44 |
| Motor |
Type |
Cone Squirrel-cage |
Cone Squirrel-cage |
| Power(kw) |
0.8*2, 1.5*2, 2.2*2 |
1.5*2, 2.1*2 |
| Rotary Speed(r/min) |
1380 |
1350 |
| Hoist Lifting Mechanism and Traveling Mechanism |
Electric Hoist Model |
MD1 |
CD1 |
| Lifting Speed(m/min) |
8/0.8, 7/0.7, 3.5/0.35 |
8, 7, 3.5 |
| Span(m) |
7.5-22.5 or assigned |
| Lifting Capacity(t) |
0.5-32 |
| Lifting Height(m) |
6, 9, 12, 18, 24, 30 |
| Traveling Speed(m/min) |
20, 30 |
| Motor |
Cone Squirrel-cage |
| Work Duty |
Intermediate Jc=25% |
| Power Supply |
380V 50HZ 3P |
| Wheel Diameter |
Φ270, Φ400 |
| Trail Width |
37-70 |
Safety Devices for overhead bridge crane:
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we
provide are not only the electric protective devices or alarm bell but also other
equipments as following:
1.Overload Limit Switch
2. Rubber Buffers
3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8.Lifting Height Limit Device
Advantages of a single girder design:
1)Less expensive due to a simpler trolley design, reduced freight costs, simplified and faster installation, and less material for the
bridge and runway beams.
2)Most economical option for light to medium-duty cranes
3)Lower loads on the building structure or foundations due to a reduced deadweight. In many cases, it can be supported by existing
roof structure without the use of additional support columns.
4)Better hook approach for both trolley travel and bridge travel
5)Easier to install, service, and maintain
6)Ideal for workshops, warehouses, material yards, and manufacturing and production facilities
7)Lighter load on runway rails or beams means less wear on the beams and end truck wheels over time
8)Great for facilities with low headroom
FAQ ABOUT MINGD CRANES:
1.Can the cranes be customized?
Yes,every customer's working condition is different, all of our products can be customized depend on customers' requirements.
Please give us the information as clear as you can, so we can give our best design to suit for your demands.
2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind
of operation way you need.
3.I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
4.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
5.In order to offer the most suitable design solution for you, it will be great helpful if you can offer us the following information to us:
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the rails? How long is it?
5. Power supply: Voltage.
6. Working condition: what kind of material to lift? temperature?
7. It would be much better if it is possible for you to offer the drawing photo of your workshop.
Certificates:
Customized Design &Production Accepted According to Your Using
Situation, Please Contact Us for Further Communication:
Tel:+8615610338438
Website: mdcrane.en.made-in-china.com
){kind=link}